English
Language : 

SH7706 Datasheet, PDF (469/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series
Section 15 Smart Card Interface
Section 15 Smart Card Interface
As an added serial communications interface function, the SCI supports an IC card (smart card)
interface that conforms to the data transfer protocol (asynchronous half-duplex character
transmission protocol) of the ISO/IEC standard 7816-3 for identification of cards. Register settings
are used to switch between the ordinary serial communication interface and the smart card
interface. Figure 15.1 is the block diagram of the smart card interface.
15.1 Feature
The smart card interface has the following features:
• Asynchronous mode
 Data length: Eight bits
 Parity bit generation and check
 Receive mode error signal detection (parity error)
 Transmit mode error signal detection and automatic re-transmission of data
 Supports both direct convention and inverse convention
• Bit rate can be selected using on-chip baud rate generator.
• Three types of interrupts: Transmit-data-empty, receive-data-full, and communication-error
interrupts are requested independently.
Rev. 5.00 May 29, 2006 page 421 of 698
REJ09B0146-0500