English
Language : 

SH7706 Datasheet, PDF (545/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series
Section 17 Pin Function Controller (PFC)
17.1.6 Port F Control Register (PFCR)
Port F Control Register (PFCR) is a 16-bit read/write register that selects the pin functions and the
input pull-up MOS control. PFCR is initialized to H'AAAA (in case of ASEMD0 = 1) or H'0000
(in case of ASEMD0 = 0) by power-on resets; however, it is not initialized by manual resets, in
standby mode, or in sleep mode.
Bit Bit Name Initial Value R/W Description
15
—
1/0
R
Reserved
When ASEMD0 = 0, this bit is always read as 0 and
must only be written with 0.
When ASEMD0 = 1, this bit is always read as 1 and
must only be written with 1.
14
—
0
R
Reserved
This bit is always read as 0 and must only be written
with 0.
13
PF6MD1 1/0
R/W PF6 Mode
12
PF6MD0 0
R/W 00: Other function (See table 17.1)
01: Port output
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
11
PF5MD1 1/0
R/W PF5 Mode
10
PF5MD0 0
R/W 00: Other function (See table 17.1)
01: Port output
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
9
PF4MD1 1/0
R/W PF4 Mode
8
PF4MD0 0
R/W 00: Other function (See table 17.1)
01: Port output
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
Rev. 5.00 May 29, 2006 page 497 of 698
REJ09B0146-0500