English
Language : 

SH7706 Datasheet, PDF (206/749 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7700 Series
Section 7 User Break Controller
7.3.7 Usage Examples
Break Condition Specified to a CPU Instruction Fetch Cycle
1. Register specifications
BARA = H'00000404, BAMRA = H'00000000, BBRA = H'0054, BARB = H'00008010,
BAMRB = H'00000006, BBRB = H'0054, BDRB = H'00000000, BDMRB = H'00000000,
BRCR = H'00300400
Specified conditions: Channel A/channel B independent mode
• Channel A
Address: H'00000404, Address mask: H'00000000
Bus cycle: CPU/instruction fetch (after instruction execution)/read (operand size is not
included in the condition)
No ASID check is included
• Channel B
Address: H'00008010, Address mask: H'00000006
Data:
H'00000000, Data mask: H'00000000
Bus cycle: CPU/instruction fetch (before instruction execution)/read (operand size is not
included in the condition)
No ASID check is included
A user break occurs after an instruction of address H'00000404 is executed or before
instructions of adresses H'00008010 to H'00008016 are executed.
2. Register specifications
BARA = H'00037226, BAMRA = H'00000000, BBRA = H'0056, BARB = H'0003722E,
BAMRB = H'00000000, BBRB = H'0056, BDRB = H'00000000, BDMRB = H'00000000,
BRCR = H'00000008, BASRA = H'80, BASRB = H'70
Specified conditions: Channel A/channel B sequence mode
• Channel A
Address: H'00037226, Address mask: H'00000000, ASID = H'80
Bus cycle: CPU/instruction fetch (before instruction execution)/read/word
• Channel B
Address: H'0003722E, Address mask: H'00000000, ASID = H'70
Data:
H'00000000, Data mask: H'00000000
Bus cycle: CPU/instruction fetch (before instruction execution)/read/word
An instruction with ASID = H'80 and address H'00037226 is executed, and a user break occurs
before an instruction with ASID = H'70 and address H'0003722E is executed.
Rev. 5.00 May 29, 2006 page 158 of 698
REJ09B0146-0500