SH7080_09 Datasheet, PDF (1557/1622 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family

Appendix
Notes: 1. Output pins become high-impedance when the HIZ bit in standby control register 6
(STBCR6) is set to 1.
2. Becomes output when the HIZCNT bit in the common control register (CMNCR) is set
to 1.
3. Becomes output when the HIZMEM bit in the common control register (CMNCR) is set
to 1.
4. Becomes high-impedance when the MZIZDH bit in the high-current port control register
(HCPCR) is cleared to 0.
5. Becomes high-impedance when the MZIZDL bit in the high-current port control register
(HCPCR) is cleared to 0.
6. Becomes high-impedance when the MZIZEL bit in the high-current port control register
(HCPCR) is cleared to 0.
7. Becomes input during a power-on reset. Pull-up to prevent erroneous operation. Pull-
down with a resistance of at least 1 MΩ as required.
8. Pulled-up inside the LSI when there is no input.
Rev. 4.00 Dec. 15, 2009 Page 1497 of 1558
REJ09B0181-0400