SH7080_09 Datasheet, PDF (1367/1622 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family

Section 23 Flash Memory
(1) Select erasure
In response to the erasure selection command, the boot program transfers the program that
performs erasure, i.e. erases data in the user MAT.
Command H'48
⎯ Command H'48 (1 byte): Selects erasure.
Response
H'06
⎯ Response H'06 (1 byte): Response to selection of erasure
This ACK code is returned after transfer of the program that performs erasure.
Error
response
H'C8
ERROR
⎯ Error response H'C8 (1 byte): Error response to selection of erasure
⎯ ERROR (1 byte): Error code
H'54: Error in selection processing (processing was not completed because of a transfer
error.)
(2) Block erasure
In response to the block erasure command, the boot program erases the data in a specified block of
the user MAT.
Command H'58
Size
Block number
SUM
⎯ Command H'58 (1 byte): Erasure of a block
⎯ Size (1 byte): The number of characters in the block number field (fixed at 1)
⎯ Block number (1 byte): Block number of the block to be erased
⎯ SUM (1 byte): Checksum
Response
H'06
⎯ Response H'06 (1 byte): Response to the block erasure command
This ACK code is returned when the block has been erased.
Rev. 4.00 Dec. 15, 2009 Page 1307 of 1558
REJ09B0181-0400