English
Language : 

SH7080_09 Datasheet, PDF (1157/1622 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family
Section 21 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
15 to 13 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
12
PC23MD0 0*1
R/W PC23 Mode
Select the function of the PC23/A23 pin.
0: PC23 I/O (port)
1: A23 output (BSC)*2
11 to 9 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
8
PC22MD0 0*1
R/W PC22 Mode
Select the function of the PC22/A22 pin.
0: PC22 I/O (port)
1: A22 output (BSC)*2
7 to 5 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
4
PC21MD0 0*1
R/W PC21 Mode
Select the function of the PC21/A21 pin.
0: PC21 I/O (port)
1: A21 output (BSC)*2
3 to 1 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
0
PC20MD0 0*1
R/W PC20 Mode
Select the function of the PC20/A20 pin.
0: PC20 I/O (port)
1: A20 output (BSC)*2
Notes: 1. The initial value is 1 in the on-chip ROM disabled external-extension mode.
2. This function is enabled only in the on-chip ROM enabled/disabled external-extension
mode. Do not set 1 in single-chip mode.
Rev. 4.00 Dec. 15, 2009 Page 1097 of 1558
REJ09B0181-0400