English
Language : 

SH7080_09 Datasheet, PDF (1151/1622 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family
Section 21 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
11 to 9 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
8
PC14MD0 0*1
R/W PC14 Mode
Select the function of the PC14/A14 pin.
0: PC14 I/O (port)
1: A14 output (BSC)*2
7 to 5 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
4
PC13MD0 0*1
R/W PC13 Mode
Select the function of the PC13/A13 pin.
0: PC13 I/O (port)
1: A13 output (BSC)*2
3 to 1 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
0
PC12MD0 0*1
R/W PC12 Mode
Select the function of the PC12/A12 pin.
0: PC12 I/O (port)
1: A12 output (BSC)*2
Notes: 1. The initial value is 1 in the on-chip ROM disabled external-extension mode.
2. This function is enabled only in the on-chip ROM enabled/disabled external-extension
mode. Do not set 1 in single-chip mode.
Rev. 4.00 Dec. 15, 2009 Page 1091 of 1558
REJ09B0181-0400