SH7080_09 Datasheet, PDF (1281/1622 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family

Section 23 Flash Memory
23.2.4 Flash Memory Configuration
This LSI's flash memory is configured by the 512-kbyte or 256-kbyte user MAT and 12-kbyte user
boot MAT.
The start address is allocated to the same address in the user MAT and user boot MAT. Therefore,
when the program execution or data access is performed between the two MATs, the MAT must
be switched by using FMATS.
The user MAT or user boot MAT can be read in all modes if it is in ROM valid mode. However,
the user boot MAT can be programmed only in boot mode and programmer mode.
Address H'00000000
<User MAT>
<User Boot MAT>
Address H'00000000
Address H'00002FFF
12 kbytes
512 kbytes or 256 kbytes
Address H'0003FFFF
(when the size of the user MAT
is 256 kbytes)
Address H'0007FFFF
(when the size of the user MAT
is 512 kbytes)
Figure 23.3 Flash Memory Configuration
The user MAT and user boot MAT have different memory sizes. Do not access a user boot MAT
that is 12 kbytes or more. When a user boot MAT exceeding 12 kbytes is read from, an undefined
value is read.
Rev. 4.00 Dec. 15, 2009 Page 1221 of 1558
REJ09B0181-0400