English
Language : 

SH7080_09 Datasheet, PDF (1155/1622 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family
Section 21 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
8
PC2MD0 0*1
R/W PC2 Mode
Select the function of the PC2/A2 pin.
0: PC2 I/O (port)
1: A2 output (BSC)*2
7 to 5 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
4
PC1MD0 0*1
R/W PC1 Mode
Select the function of the PC1/A1 pin.
0: PC1 I/O (port)
1: A1 output (BSC)*2
3 to 1 ⎯
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
0
PC0MD0 0*1
R/W PC0 Mode
Select the function of the PC0/A0 pin.
0: PC0 I/O (port)
1: A0 output (BSC)*2
Notes: 1. The initial value is 1 in the on-chip ROM disabled external-extension mode.
2. This function is enabled only in the on-chip ROM enabled/disabled external-extension
mode. Do not set 1 in single-chip mode.
Rev. 4.00 Dec. 15, 2009 Page 1095 of 1558
REJ09B0181-0400