SH7785 Datasheet, PDF (963/1692 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

19. Display Unit (DU)
19.4.2 Display On/Off
All plane display can be turned on and off using the DEN bit in DSYSR. When the DEN bit is 0,
the display data set in DOOR is displayed.
Display is turned on and off for planes 1 to 6 using DPPR. Under the following display conditions,
display data set in BPOR is displayed.
1. When display of all planes 1 to 6 is turned off
2. In an area with no plane for display, due to the display size and display position
3. When the pixels in a plane for display are all a transparent color
Table 19.5 Display On/Off of Plane 1 to 6
Display Plane Display Plane Priority Register (DPPR)
Plane 1
Plane 1 is selected in one among priority positions 1 to 6, and the
corresponding enable bit is set to 1
Plane 2
Plane 2 is selected in one among priority positions 1 to 6, and the
corresponding enable bit is set to 1
Plane 3
Plane 3 is selected in one among priority positions 1 to 6, and the
corresponding enable bit is set to 1
Plane 4
Plane 4 is selected in one among priority positions 1 to 6, and the
corresponding enable bit is set to 1
Plane 5
Plane 5 is selected in one among priority positions 1 to 6, and the
corresponding enable bit is set to 1
Plane 6
Plane 6 is selected in one among priority positions 1 to 6, and the
corresponding enable bit is set to 1
Note: Even if display on is set using DPPR, under the following conditions, the setting is handled
as display off, and the corresponding plane is not displayed.
• Planes for which the value set in PnDPXR is greater than the screen size (horizontal
display ending position register (HDE) - horizontal display start position register (HDS))
• Planes for which the value set in PnDPYR is greater than the screen size (vertical
display ending position register (VDE) - vertical display start position register (VDS))
• Planes for which the value set in PnDSXR is 0
• Planes for which the value set in PnDSYR is 0
• Planes for which the value set in PnMWR is 0
• Planes for which the value set in PnSPXR is equal to or greater than twice the value set
in PnMWR
Rev.1.00 Jan. 10, 2008 Page 933 of 1658
REJ09B0261-0100