SH7785 Datasheet, PDF (327/1692 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

Initial
Bit
Name
Value
16
NMIFL 0
15 to 0 —
All 0
10. Interrupt Controller (INTC)
R/W Description
R/(W) NMI Flag (NMI Interrupt Request Detection)
Indicates whether an NMI interrupt request signal has
been detected. This bit is automatically set to 1 when
the INTC detects an NMI interrupt request. Write 0 to
clear the bit. Writing 1 to this bit has no effect.
[When read]
1: NMI has been detected
0: NMI has not been detected
[When written]
0: Clears the NMI flag
1: No effect
R
Reserved
These bits are always read as 0. The write value
should always be 0.
Rev.1.00 Jan. 10, 2008 Page 297 of 1658
REJ09B0261-0100