SH7785 Datasheet, PDF (1163/1692 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

22. Serial I/O with FIFO (SIOF)
22.4.4 Register Allocation of Transfer Data
(1) Transmit/Receive Data
Writing and reading of transmit/receive data is performed for the following registers.
• Transmit data writing: SITDR (32-bit access)
• Receive data reading: SIRDR (32-bit access)
Figure 22.5 shows the transmit/receive data and the SITDR and SIRDR bit alignment.
(a) 16-bit stereo data
31
24 23
16 15
87
0
L-channel data
R-channel data
(b) 16-bit monaural data
31
24 23
16 15
87
0
Data
(c) 8-bit monaural data
31
24 23
16 15
87
0
Data
(d) 16-bit stereo data (left and right same audio output)
31
24 23
16 15
87
0
Data
Figure 22.5 Transmit/Receive Data Bit Alignment
Note: In the figure, only the shaded areas are transmitted or received as valid data. Therefore,
access must be made in byte units for 8-bit data, and in word units for 16-bit data. Data in
not shaded areas is not transmitted or received.
Monaural or stereo can be specified for transmit data by the TDLE bit and TDRE bit in SITDAR.
Monaural or stereo can be specified for receive data by the RDLE bit and RDRE bit in SIRDAR.
To achieve left and right same audio output while stereo is specified for transmit data, set the
TLREP bit in SITDAR. Tables 22.8 and 22.9 show the audio mode specification for transmit data
and that for receive data, respectively.
Rev.1.00 Jan. 10, 2008 Page 1133 of 1658
REJ09B0261-0100