SH7785 Datasheet, PDF (1501/1692 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

29. User Break Controller (UBC)
29.2.8 Channel Match Flag Register (CCMFR)
CCMFR is a readable/writable 32-bit register which indicates whether or not the match conditions
have been satisfied for each channel. When a channel match condition has been satisfied, the
corresponding flag bit is set to 1. To clear the flags, write the data containing value 0 for the bits to
be cleared and value 1 for the other bits to this register. (The logical AND between the value
which has been written and the current register value is actually written to the register.) Sequential
operation using multiple channels is available by using these match flags.
Bit : 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Initial value : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R/W: R R R R R R R R R R R R R R R R
Bit : 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MF1 MF0
Initial value : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R/W: R R R R R R R R R R R R R R R/W R/W
Bit
31 to 2
Bit Name
—
Initial
Value
All 0
1
MF1
0
0
MF0
0
R/W Description
R
Reserved
For read/write in this bit, refer to General Precautions
on Handling of Product.
R/W Channel 1 Condition Match Flag
This flag is set to 1 when the channel 1 match
condition has been satisfied. To clear the flag, write 0
to this bit.
0: Channel 1 match condition has not been satisfied.
1: Channel 1 match condition has been satisfied.
R/W Channel 0 Condition Match Flag
This flag is set to 1 when the channel 0 match
condition has been satisfied. To clear the flag, write 0
to this bit.
0: Channel 0 match condition has not been satisfied.
1: Channel 0 match condition has been satisfied.
Rev.1.00 Jan. 10, 2008 Page 1471 of 1658
REJ09B0261-0100