|
307013-003 Datasheet, PDF (585/848 Pages) Intel Corporation – Intel I/O Controller Hub 7 | |||
|
◁ |
SMBus Controller Registers (D31:F3)
14.1.4
Note:
PCISTSâPCI Status Register (SMBUSâD31:F3)
Address:
06hâ07h
Default Value: 0280h
Attributes:
Size:
RO, R/WC
16 bits
For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to
the bit has no effect.
14.1.5
Bit
Description
15
14
13
12
11
10:9
8
7
6
5
4
3
2:0
Detected Parity Error (DPE) â R/WC.
0 = No parity error detected.
1 = Parity error detected.
Signaled System Error (SSE) â R/WC.
0 = No system error detected.
1 = System error detected.
Received Master Abort (RMA) â RO. Hardwired to 0.
Received Target Abort (RTA) â RO. Hardwired to 0.
Signaled Target Abort (STA) â R/WC.
0 = Intel® ICH7 did Not terminate transaction for this function with a target abort.
1 = The function is targeted with a transaction that the ICH7 terminates with a target
abort.
DEVSEL# Timing Status (DEVT) â RO. This 2-bit field defines the timing for DEVSEL#
assertion for positive decode.
01 = Medium timing.
Data Parity Error Detected (DPED) â RO. Hardwired to 0.
Fast Back to Back Capable (FB2BC) â RO. Hardwired to 1.
User Definable Features (UDF) â RO. Hardwired to 0.
66 MHz Capable (66MHZ_CAP) â RO. Hardwired to 0.
Capabilities List (CAP_LIST) â RO. Hardwired to 0 because there are no capability list
structures in this function
Interrupt Status (INTS) â RO. This bit indicates that an interrupt is pending. It is
independent from the state of the Interrupt Enable bit in the PCI Command register.
Reserved
RIDâRevision Identification Register (SMBUSâD31:F3)
Offset Address: 08h
Default Value: See bit description
Attribute:
Size:
RO
8 bits
Bit
Description
7:0
Revision ID â RO. Refer to the Intel® I/O Controller Hub 7 (ICH7) Family Specification
Update for the value of the Revision ID Register.
Intel ® ICH7 Family Datasheet
585
|
▷ |