307013-003 Datasheet, PDF (374/848 Pages) Intel Corporation – Intel I/O Controller Hub 7

LPC Interface Bridge Registers (D31:F0)
10.1.21 LPC_EN—LPC I/F Enables Register (LPC I/F—D31:F0)
Offset Address: 82h – 83h
Default Value: 0000h
Attribute:
Size:
Power Well:
R/W
16 bit
Core
Bit
Description
15:14 Reserved
CNF2_LPC_EN — R/W. Microcontroller Enable # 2.
13 ^{0 = Disable.}
1 = Enables the decoding of the I/O locations 4Eh and 4Fh to the LPC interface. This
range is used for a microcontroller.
CNF1_LPC_EN — R/W. Super I/O Enable.
12 ^{0 = Disable.}
1 = Enables the decoding of the I/O locations 2Eh and 2Fh to the LPC interface. This
range is used for Super I/O devices.
MC_LPC_EN — R/W. Microcontroller Enable # 1.
11 ^{0 = Disable.}
1 = Enables the decoding of the I/O locations 62h and 66h to the LPC interface. This
range is used for a microcontroller.
KBC_LPC_EN — R/W. Keyboard Enable.
10 ^{0 = Disable.}
1 = Enables the decoding of the I/O locations 60h and 64h to the LPC interface. This
range is used for a microcontroller.
GAMEH_LPC_EN — R/W. High Gameport Enable
9
0 = Disable.
1 = Enables the decoding of the I/O locations 208h to 20Fh to the LPC interface. This
range is used for a gameport.
GAMEL_LPC_EN — R/W. Low Gameport Enable
8
0 = Disable.
1 = Enables the decoding of the I/O locations 200h to 207h to the LPC interface. This
range is used for a gameport.
7:4 Reserved
FDD_LPC_EN — R/W. Floppy Drive Enable
3
0 = Disable.
1 = Enables the decoding of the FDD range to the LPC interface. This range is selected
in the LPC_FDD/LPT Decode Range Register (D31:F0:80h, bit 12).
LPT_LPC_EN — R/W. Parallel Port Enable
2
0 = Disable.
1 = Enables the decoding of the LPTrange to the LPC interface. This range is selected in
the LPC_FDD/LPT Decode Range Register (D31:F0:80h, bit 9:8).
COMB_LPC_EN — R/W. Com Port B Enable
1
0 = Disable.
1 = Enables the decoding of the COMB range to the LPC interface. This range is
selected in the LPC_COM Decode Range Register (D31:F0:80h, bits 6:4).
COMA_LPC_EN — R/W. Com Port A Enable
0
0 = Disable.
1 = Enables the decoding of the COMA range to the LPC interface. This range is
selected in the LPC_COM Decode Range Register (D31:F0:80h, bits 3:2).
374
Intel ^® ICH7 Family Datasheet