SH7055S Datasheet, PDF (853/1002 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7000 Series

Response H'35 Size Number of areas
Start address of area
Last address of area
...
SUM
 Response: H'35 (one byte): Response to the user MAT information inquiry
 Size (one byte): Amount of data that represents the number of areas, the start address of
each area, and the last address of each area
 Number of areas (one byte): Number of non-consecutive user MAT areas
When user MAT areas are consecutive, the number of areas returned is H'01.
 Start address of area (four bytes): Start address of the area
 Last address of area (four bytes): Last address of the area
There are as many groups of data representing the start and last addresses as there are
areas.
 SUM (one byte): Checksum
(9) Erased Block Information Inquiry
The boot program will return the number of erased blocks and their addresses.
Command H'26
 Command: H'26 (one byte): Inquiry regarding erased block information
Response H'36 Size
Number of
blocks
Start address of block
Last address of block
...
SUM
 Response: H'36 (one byte): Response to the number of erased blocks and addresses
 Size (two bytes): Amount of data that represents the number of blocks, the start address of
each block, and the last address of each block
 Number of blocks (one byte): Number of erased blocks in flash memory
 Start address of block (four bytes): Start address of the block
 Last address of block (four bytes): Last address of the block
There are as many groups of data representing the start and last addresses as there are
blocks.
 SUM (one byte): Checksum
(10) Programming Unit Inquiry
The boot program will return the programming unit used to program data.
Command H'27
 Command: H'27 (one byte): Inquiry regarding programming unit
Rev.2.0, 07/03, page 815 of 960