SH7055S Datasheet, PDF (702/1002 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7000 Series

• Bit 15—Reserved: This bit is always read as 0. The write value should always be 0.
• Bit 14—PD7 Mode Bit (PD7MD): Selects the function of pin PD7/TIO1H.
Bit 14: PD7MD
0
1
Description
General input/output (PD7)
ATU-II input capture input/output compare output (TIO1H)
(Initial value)
• Bit 13—Reserved: This bit is always read as 0. The write value should always be 0.
• Bit 12—PD6 Mode Bit (PD6MD): Selects the function of pin PD6/TIO1G.
Bit 12: PD6MD
0
1
Description
General input/output (PD6)
ATU-II input capture input/output compare output (TIO1G)
(Initial value)
• Bit 11—Reserved: This bit is always read as 0. The write value should always be 0.
• Bit 10—PD5 Mode Bit (PD5MD): Selects the function of pin PD5/TIO1F.
Bit 10: PD5MD
0
1
Description
General input/output (PD5)
ATU-II input capture input/output compare output (TIO1F)
(Initial value)
• Bit 9—Reserved: This bit is always read as 0. The write value should always be 0.
• Bit 8—PD4 Mode Bit (PD4MD): Selects the function of pin PD4/TIO1E.
Bit 8: PD4MD
0
1
Description
General input/output (PD4)
ATU-II input capture input/output compare output (TIO1E)
(Initial value)
• Bit 7—Reserved: This bit is always read as 0. The write value should always be 0.
• Bit 6—PD3 Mode Bit (PD3MD): Selects the function of pin PD3/TIO1D.
Bit 6: PD3MD
0
1
Description
General input/output (PD3)
ATU-II input capture input/output compare output (TIO1D)
(Initial value)
• Bit 5—Reserved: This bit is always read as 0. The write value should always be 0.
• Bit 4—PD2 Mode Bit (PD2MD): Selects the function of pin PD2/TIO1C.
Rev.2.0, 07/03, page 664 of 960