SH7055S Datasheet, PDF (346/1002 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7000 Series

• Bit 4—Duty Selection Register A (DTSELA): Selects whether channel 6A TO6A output
PWM is set to on-duty or to off-duty.
Bit 4: DTSELA
0
1
Description
TO6A PWM output is on-duty
TO6A PWM output is off-duty
(Initial value)
• Bit 3—Counter Selection Register D (CNTSELD): Selects whether channel 6D PWM is set to
non-complementary PWM mode or to complementary PWM mode.
Bit 3: CNTSELD
0
1
Description
TCNT6D is set to non-complementary PWM mode
TCNT6D is set to complementary PWM mode
(Initial value)
• Bit 2—Counter Selection Register C (CNTSELC): Selects whether channel 6C PWM is set to
non-complementary PWM mode or to complementary PWM mode.
Bit 2: CNTSELC
0
1
Description
TCNT6C is set to non-complementary PWM mode
TCNT6C is set to complementary PWM mode
(Initial value)
• Bit 1—Counter Selection Register B (CNTSELB): Selects whether channel 6B PWM is set to
non-complementary PWM mode or to complementary PWM mode.
Bit 1: CNTSELB
0
1
Description
TCNT6B is set to non-complementary PWM mode
TCNT6B is set to complementary PWM mode
(Initial value)
• Bit 0—Counter Selection Register A (CNTSELA): Selects whether channel 6A PWM is set to
non-complementary PWM mode or to complementary PWM mode.
Bit 0: CNTSELA
0
1
Description
TCNT6A is set to non-complementary PWM mode
TCNT6A is set to complementary PWM mode
(Initial value)
Rev.2.0, 07/03, page 308 of 960