English
Language : 

MC9S12XD256MAL Datasheet, PDF (567/1348 Pages) Freescale Semiconductor, Inc – Freescale’s Scalable Controller Area Network
Chapter 14 Voltage Regulator (S12VREG3V3V5)
Table 14-10. Interrupt Vectors
Interrupt Source
Autonomous periodical interrupt (API)
Local Enable
APIE = 1
14.4.10.1 Low-Voltage Interrupt (LVI)
In FPM, VREG_3V3 monitors the input voltage VDDA. Whenever VDDA drops below level VLVIA, the
status bit LVDS is set to 1. On the other hand, LVDS is reset to 0 when VDDA rises above level VLVID. An
interrupt, indicated by flag LVIF = 1, is triggered by any change of the status bit LVDS if interrupt enable
bit LVIE = 1.
NOTE
On entering the Reduced Power Mode, the LVIF is not cleared by the
VREG_3V3.
14.4.10.2 Autonomous Periodical Interrupt (API)
As soon as the configured timeout period of the API has elapsed, the APIF bit is set. An interrupt, indicated
by flag APIF = 1, is triggered if interrupt enable bit APIE = 1.
MC9S12XDP512 Data Sheet, Rev. 2.21
Freescale Semiconductor
567