MC9S12XD256MAL Datasheet, PDF (480/1348 Pages) Freescale Semiconductor, Inc – Freescale’s Scalable Controller Area Network

Chapter 11 Serial Communication Interface (S12SCIV5)
11.2 External Signal Description
The SCI module has a total of two external pins.
11.2.1 TXD — Transmit Pin
The TXD pin transmits SCI (standard or infrared) data. It will idle high in either mode and is high
impedance anytime the transmitter is disabled.
11.2.2 RXD — Receive Pin
The RXD pin receives SCI (standard or infrared) data. An idle line is detected as a line high. This input is
ignored when the receiver is disabled and should be terminated to a known voltage.
11.3 Memory Map and Register Definition
This section provides a detailed description of all the SCI registers.
11.3.1 Module Memory Map and Register Definition
The memory map for the SCI module is given below in Figure 11-2. The address listed for each register is
the address offset. The total address for each register is the sum of the base address for the SCI module and
the address offset for each register.
MC9S12XDP512 Data Sheet, Rev. 2.21
480
Freescale Semiconductor