MC9S12XD256MAL Datasheet, PDF (1247/1348 Pages) Freescale Semiconductor, Inc – Freescale’s Scalable Controller Area Network

Appendix A Electrical Characteristics
Table A-8. I/O Characteristics for Port C, D, PE5, PE6, and PK7
for Reduced Input Voltage Thresholds
Conditions are 4.5 V < V_DD35 < 5.5 V Temperature from –40°C to +140°C, unless otherwise noted
Num C
Rating
Symbol
Min
Typ
1 P Input high voltage
2 P Input low voltage
3 C Input hysteresis
VIH
1.75
—
VIL
—
—
VHYS
—
100
Max
Unit
—
V
0.75
V
—
mV
A.1.10 Supply Currents
This section describes the current consumption characteristics of the device as well as the conditions for
the measurements.
A.1.10.1 Measurement Conditions
All measurements are without output loads. Unless otherwise noted the currents are measured in single
chip mode and the CPU and XGATE code is executed from RAM, V_DD35=5.5V, internal voltage regulator
is enabled and the bus frequency is 40MHz using a 4-MHz external clock source (PE7=XCLKS=0).
Production testing is performed using a square wave signal at the EXTAL input.
Freescale Semiconductor
MC9S12XDP512 Data Sheet, Rev. 2.21
1249