MC9S12XD256MAL Datasheet, PDF (1306/1348 Pages) Freescale Semiconductor, Inc – Freescale’s Scalable Controller Area Network

Appendix F Ordering Information
Appendix F
Ordering Information
The following figure provides an ordering number example for the devices covered by this data book.
There are two options when ordering a device. Customers must choose between ordering either the
mask-specific partnumber or the generic / mask-independent partnumber Ordering the mask-specific
partnumber enables the customer to specify which particular maskset they will receive whereas FSL will
ship the currently preferred maskset against any orders for the generic partnumber. In either case, the
marking on the device will always show the generic / mask-independent partnumber and the mask set
number. For specific partnumbers, please contact your local sales office. The below figure illustrates a
mask-specific ordering number.
Part numbers may be abbreviated: check with manufacturer for exact part
number
S 9 12XDP512 J1 M AL R
Part name
(abbreviated)
see Table 1-6
Main Memory Type
9=Flash
3=ROM
Status / Partnumber type
S or SC = Maskset specific partnumber
MC = Generic/mask independent partnumber
P or PC = Prototype status
Tape & Reel Suffix (Optional):
No R = No Tape & Reel
R = Tape & Reel
Package Option
FU = 80QFP (non lead -free)
PV = 112LQFP (non lead -free)
FV = 144LQFP (non lead -free)
AA = 80QFP (lead free)
AL=112LQFP (lead free)
AG = 144LQFP (Lead free)
Temperature Option
C = -40 to 85 °C
V = -40 to 105 °C
M = -40 to 125 °C
Maskset identifier suffix (two digits):
First digit references wafer fab
Second digit differentiates mask
This suffix is omitted in generic partnumbers
J1 = 1L15Y maskset in this case
F0 = 0M42E maskset in this case
1308
MC9S12XDP512 Data Sheet, Rev. 2.21
Freescale Semiconductor