MC9S12XD256MAL Datasheet, PDF (55/1348 Pages) Freescale Semiconductor, Inc – Freescale’s Scalable Controller Area Network

Chapter 1 Device Overview MC9S12XD-Family
Table 1-7. Signal Properties Summary (Sheet 4 of 4)
Pin
Name
Function 1
Pin
Name
Function 2
Pin
Name
Function 3
Pin
Name
Function 4
Pin
Name
Function 5
Power
Supply
PS5
MOSI0
—
—
—
V_DDX
PS4
MISO0
—
—
—
V_DDX
PS3
TXD1
—
—
—
V_DDX
PS2
RXD1
—
—
—
V_DDX
PS1
TXD0
—
—
—
V_DDX
PS0
RXD0
—
—
—
V_DDX
PT[7:0] IOC[7:0]
—
—
—
V_DDX
Internal Pull
Resistor
CTRL
Reset
State
Description
PERS/
PPSS
PERS/
PPSS
PERS/
PPSS
Up Port S I/O, MOSI of SPI0
Up Port S I/O, MISO of SPI0
Up Port S I/O, TXD of SCI1
PERS/
PPSS
PERS/
PPSS
PERS/
PPSS
PERT/
PPST
Up Port S I/O, RXD of SCI1
Up Port S I/O, TXD of SCI0
Up Port S I/O, RXD of SCI0
Disabled Port T I/O, timer channels
NOTE
For devices assembled in 80-pin and 112-pin packages all non-bonded out
pins should be configured as outputs after reset in order to avoid current
drawn from floating inputs. Refer to Table 1-7 for affected pins.
1.2.3
Detailed Signal Descriptions
NOTE
This section describes all pins which are availabe on the cover part
MC9S12XDP512 in 144-pin LQFP package. For modules and pinout
explanations of the different family members refer to E.7 Pinout
explanations: and E.5 Peripheral Sets S12XD - Family and E.6 Peripheral
Sets S12XA & S12XB - Family
1.2.3.1 EXTAL, XTAL — Oscillator Pins
EXTAL and XTAL are the crystal driver and external clock pins. On reset all the device clocks are derived
from the EXTAL input frequency. XTAL is the crystal output.
1.2.3.2 RESET — External Reset Pin
The RESET pin is an active low bidirectional control signal. It acts as an input to initialize the MCU to a
known start-up state. As an output it is driven ;ow to indicate when any internal MCU reset source triggers.
The RESET pin has an internal pullup device.
MC9S12XDP512 Data Sheet, Rev. 2.21
Freescale Semiconductor
55