MC9S12XD256MAL Datasheet, PDF (450/1348 Pages) Freescale Semiconductor, Inc – Freescale’s Scalable Controller Area Network

Chapter 10 Freescale’s Scalable Controller Area Network (S12MSCANV3)
Read: For transmit buffers, anytime when TXEx flag is set (see Section 10.3.2.7, “MSCAN Transmitter
Flag Register (CANTFLG)”) and the corresponding transmit buffer is selected in CANTBSEL (see
Section 10.3.2.11, “MSCAN Transmit Buffer Selection Register (CANTBSEL)”). For receive buffers,
only when RXF flag is set (see Section 10.3.2.5, “MSCAN Receiver Flag Register (CANRFLG)”).
Write: For transmit buffers, anytime when TXEx flag is set (see Section 10.3.2.7, “MSCAN Transmitter
Flag Register (CANTFLG)”) and the corresponding transmit buffer is selected in CANTBSEL (see
Section 10.3.2.11, “MSCAN Transmit Buffer Selection Register (CANTBSEL)”). Unimplemented for
receive buffers.
Reset: Undefined (0x00XX) because of RAM-based implementation
Figure 10-25. Receive/Transmit Message Buffer — Standard Identifier Mapping
Register
Name
Bit 7
6
5
4
3
2
1
Bit 0
R
IDR0
ID10
ID9
ID8
ID7
ID6
ID5
ID4
ID3
W
R
IDR1
ID2
ID1
ID0
RTR
IDE (=0)
W
R
IDR2
W
R
IDR3
W
= Unused, always read ‘x’
10.3.3.1 Identifier Registers (IDR0–IDR3)
The identifier registers for an extended format identifier consist of a total of 32 bits; ID[28:0], SRR, IDE,
and RTR bits. The identifier registers for a standard format identifier consist of a total of 13 bits; ID[10:0],
RTR, and IDE bits.
10.3.3.1.1 IDR0–IDR3 for Extended Identifier Mapping
R
W
Reset:
7
ID28
6
ID27
5
ID26
4
ID25
3
ID24
2
ID23
1
ID22
x
x
x
x
x
x
x
Figure 10-26. Identifier Register 0 (IDR0) — Extended Identifier Mapping
0
ID21
x
MC9S12XDP512 Data Sheet, Rev. 2.21
450
Freescale Semiconductor