HD64F2638F20J Datasheet, PDF (716/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

Section 16 Controller Area Network (HCAN)
H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
• Mailbox transmit/receive settings
Each channel has one receive-only mailbox (mailbox 0) plus 15 mailboxes that can be set for
reception. Thus a total of 32 mailboxes can be used for reception. To set a mailbox for
reception, set the corresponding bit to 1 in the mailbox configuration register (MBCR). The
initial setting for mailboxes is 0, designating transmission use. Refer to Mailbox
Transmit/Receive Settings in 16.3.2, Initialization after Hardware Reset, for details.
• Mailbox (RAM) initialization
As message control/data registers (MCx[x], MDx[x]) are configured in RAM, their initial
values after powering on are undefined, and so bit initialization is necessary. Write 0s or 1s to
the mailboxes. See Mailbox (Message Control/Data (MCx[x], MDx[x]) Initial Setting in
16.3.2, Initialization after a Hardware Reset, for details.
Page 666 of 1458
REJ09B0103-0800 Rev. 8.00
May 28, 2010