HD64F2638F20J Datasheet, PDF (416/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

Section 10 16-Bit Timer Pulse Unit (TPU)
H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Example of PWM Mode Setting Procedure: Figure 10-24 shows an example of the PWM mode
setting procedure.
PWM mode
Select counter clock
[1]
Select counter clearing source [2]
Select waveform output level [3]
Set TGR
[4]
Set PWM mode
[5]
Start count
[6]
[1] Select the counter clock with bits TPSC2 to
TPSC0 in TCR. At the same time, select the
input clock edge with bits CKEG1 and CKEG0 in
TCR.
[2] Use bits CCLR2 to CCLR0 in TCR to select the
TGR to be used as the TCNT clearing source.
[3] Use TIOR to designate the TGR as an output
compare register, and select the initial value and
output value.
[4] Set the cycle in the TGR selected in [2], and set
the duty in the other the TGR.
[5] Select the PWM mode with bits MD3 to MD0 in
TMDR.
[6] Set the CST bit in TSTR to 1 to start the count
operation.
<PWM mode>
Figure 10-24 Example of PWM Mode Setting Procedure
Page 366 of 1458
REJ09B0103-0800 Rev. 8.00
May 28, 2010