HD64F2638F20J Datasheet, PDF (340/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

Section 9 I/O Ports
H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Port E MOS Pull-Up Control Register (PEPCR)
Bit
:
7
6
5
4
3
2
1
0
PE7PCR PE6PCR PE5PCR PE4PCR PE3PCR PE2PCR PE1PCR PE0PCR
Initial value :
0
0
0
0
0
0
0
0
R/W
: R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
PEPCR is an 8-bit readable/writable register that controls the MOS input pull-up function
incorporated into port E on an individual bit basis.
When a PEDDR bit is cleared to 0 (input port setting) with 8-bit bus mode selected in mode 4, 5,
or 6, or in mode 7, setting the corresponding PEPCR bit to 1 turns on the MOS input pull-up for
the corresponding pin.
PEPCR is initialized to H'00 by a reset, and in hardware standby mode. It retains its prior state in
software standby mode.
9.10.3 Pin Functions
Modes 4 to 6: In modes 4 to 6, when 8-bit access is designated and 8-bit bus mode is selected,
port E pins are automatically designated as I/O ports. Setting a PEDDR bit to 1 makes the
corresponding port E pin an output port, while clearing the bit to 0 makes the pin an input port.
When 16-bit bus mode is selected, the input/output direction specification by PEDDR is ignored,
and port E is designated for data I/O.
Port E pin functions in modes 4 to 6 are shown in figure 9-19.
Page 290 of 1458
REJ09B0103-0800 Rev. 8.00
May 28, 2010