HD64F2638F20J Datasheet, PDF (371/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Section 10 16-Bit Timer Pulse Unit (TPU)
10.2.3 Timer I/O Control Register (TIOR)
Channel 0: TIOR0H
Channel 1: TIOR1
Channel 2: TIOR2
Channel 3: TIOR3H
Channel 4: TIOR4
Channel 5: TIOR5
Bit
:
Initial value :
R/W
:
7
IOB3
0
R/W
6
IOB2
0
R/W
5
IOB1
0
R/W
4
IOB0
0
R/W
3
IOA3
0
R/W
2
IOA2
0
R/W
1
IOA1
0
R/W
0
IOA0
0
R/W
Channel 0: TIOR0L
Channel 3: TIOR3L
Bit
:
Initial value :
R/W
:
7
IOD3
0
R/W
6
IOD2
0
R/W
5
IOD1
0
R/W
4
IOD0
0
R/W
3
IOC3
0
R/W
2
IOC2
0
R/W
1
IOC1
0
R/W
0
IOC0
0
R/W
Note: When TGRC or TGRD is designated for buffer operation, this setting is invalid and the
register operates as a buffer register.
The TIOR registers are 8-bit registers that control the TGR registers. The TPU has eight TIOR
registers, two each for channels 0 and 3, and one each for channels 1, 2, 4, and 5. The TIOR
registers are initialized to H'00 by a reset, and in hardware standby mode.
Care is required since TIOR is affected by the TMDR setting. The initial output specified by TIOR
is valid when the counter is stopped (the CST bit in TSTR is cleared to 0). Note also that, in PWM
mode 2, the output at the point at which the counter is cleared to 0 is specified.
REJ09B0103-0800 Rev. 8.00
May 28, 2010
Page 321 of 1458