HD64F2638F20J Datasheet, PDF (390/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

Section 10 16-Bit Timer Pulse Unit (TPU)
H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Bit 3—Input Capture/Output Compare Flag D (TGFD): Status flag that indicates the
occurrence of TGRD input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 3 is reserved. It is always read as 0 and cannot be modified.
Bit 3
TGFD
0
1
Description
[Clearing conditions]
(Initial value)
• When DTC is activated by TGID interrupt while DISEL bit of MRB in DTC is 0
• When 0 is written to TGFD after reading TGFD = 1
[Setting conditions]
• When TCNT = TGRD while TGRD is functioning as output compare register
• When TCNT value is transferred to TGRD by input capture signal while TGRD is
functioning as input capture register
Bit 2—Input Capture/Output Compare Flag C (TGFC): Status flag that indicates the
occurrence of TGRC input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 2 is reserved. It is always read as 0 and cannot be modified.
Bit 2
TGFC
0
1
Description
[Clearing conditions]
(Initial value)
• When DTC is activated by TGIC interrupt while DISEL bit of MRB in DTC is 0
• When 0 is written to TGFC after reading TGFC = 1
[Setting conditions]
• When TCNT = TGRC while TGRC is functioning as output compare register
• When TCNT value is transferred to TGRC by input capture signal while TGRC is
functioning as input capture register
Page 340 of 1458
REJ09B0103-0800 Rev. 8.00
May 28, 2010