HD64F2638F20J Datasheet, PDF (163/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Section 5 Interrupt Controller
Bit n
IRQnF
0
1
Description
[Clearing conditions]
(Initial value)
• Cleared by reading IRQnF flag when IRQnF = 1, then writing 0 to IRQnF flag
• When interrupt exception handling is executed when low-level detection is set
(IRQnSCB = IRQnSCA = 0) and IRQn input is high
• When IRQn interrupt exception handling is executed when falling, rising, or both-
edge detection is set (IRQnSCB = 1 or IRQnSCA = 1)
• When the DTC is activated by an IRQn interrupt, and the DISEL bit in MRB of the
DTC is cleared to 0
[Setting conditions]
• When IRQn input goes low when low-level detection is set (IRQnSCB = IRQnSCA =
0)
• When a falling edge occurs in IRQn input when falling edge detection is set
(IRQnSCB = 0, IRQnSCA = 1)
• When a rising edge occurs in IRQn input when rising edge detection is set
(IRQnSCB = 1, IRQnSCA = 0)
• When a falling or rising edge occurs in IRQn input when both-edge detection is set
(IRQnSCB = IRQnSCA = 1)
(n = 5 to 0)
REJ09B0103-0800 Rev. 8.00
May 28, 2010
Page 113 of 1458