SH7280 Datasheet, PDF (743/1726 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine family

Section 13 Port Output Enable 2 (POE2)
Initial
Bit
Bit Name
Value R/W Description
5
MTU2SP5CZE 0
R/W* MTU2S Port 5 Output Comparison/High-Impedance
Enable
Specifies whether to compare output levels for the
MTU2S high-current PD12/TIOC4AS and
PD14/TIOC4CS pins and to place them in high-
impedance state when the OSF2 bit is set to 1 while
the OCE2 bit is 1 or when any one of the POE4F,
POE5F, POE6F, POE7F, and MTU2SHIZ bits is set
to 1.
0: Does not compare output levels or place the pins in
high-impedance state.
1: Compares output levels and places the pins in
high-impedance state.
4
MTU2SP6CZE 0
R/W* MTU2S Port 6 Output Comparison/High-Impedance
Enable
Specifies whether to compare output levels for the
MTU2S high-current PD13/TIOC4BS and
PD15/TIOC4DS pins and to place them in high-
impedance state when the OSF2 bit is set to 1 while
the OCE2 bit is 1 or when any one of the POE4F,
POE5F, POE6F, POE7F, and MTU2SHIZ bits is set
to 1.
0: Does not compare output levels or place the pins in
high-impedance state.
1: Compares output levels and places the pins in
high-impedance state.
3
—
0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
Rev. 1.00 Jun. 26, 2008 Page 713 of 1692
REJ09B0393-0100