SH7280 Datasheet, PDF (514/1726 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine family

Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)
Initial
Bit
Bit Name Value R/W Description
7 to 3 —
All 0
R
Reserved
These bits are always read as 0. The write value should
always be 0.
2
TTSE
0
R/W Timing Select E
Specifies the timing for transferring data from TGRF_0
to TGRE_0 when they are used together for buffer
operation.
In channels 3 and 4, bit 2 is reserved. It is always read
as 0 and the write value should always be 0. When
channel 0 is used in a mode other than PWM mode, do
not set this bit to 1.
0: When compare match E occurs in channel 0
1: When TCNT_0 is cleared
1
TTSB
0
R/W Timing Select B
Specifies the timing for transferring data from TGRD to
TGRB in each channel when they are used together for
buffer operation. When the channel is used in a mode
other than PWM mode, do not set this bit to 1.
0: When compare match B occurs in each channel
1: When TCNT is cleared in each channel
0
TTSA
0
R/W Timing Select A
Specifies the timing for transferring data from TGRC to
TGRA in each channel when they are used together for
buffer operation. When the channel is used in a mode
other than PWM mode, do not set this bit to 1.
0: When compare match A occurs in each channel
1: When TCNT is cleared in each channel
Rev. 1.00 Jun. 26, 2008 Page 484 of 1692
REJ09B0393-0100