SH7065 Datasheet, PDF (790/941 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7000 Series

Section 19 256 kB Flash Memory (F-ZTAT)
19.9 Flash Memory Emulation in RAM
Making a setting in the RAM emulation register (RAMER) enables part of RAM to be overlapped
onto the flash memory area so that data to be written to flash memory can be emulated in RAM in
real time. After the RAMER setting has been made, accesses can be made from the flash memory
area or the RAM area overlapping flash memory. Emulation can be performed in user mode and
user program mode. Figure 19.16 shows an example of emulation of real-time flash memory
programming.
Start of emulation program
Set RAMER
Write tuning data to overlap
RAM
Execute application program
No
Tuning OK?
Yes
Clear RAMER
Write to flash memory emulation
block
End of emulation program
Figure 19.16 Flowchart of Flash Memory Emulation in RAM
Note: The number of execution cycles in emulation with RAM differs from the number of cycles
when using flash memory.
Rev. 5.00 Sep 11, 2006 page 768 of 916
REJ09B0332-0500