SH7065 Datasheet, PDF (745/941 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7000 Series

18.10 Port I
Port I is an input port with the 8 pins shown in figure 18.14.
Section 18 I/O Ports (I/O)
Port I
P17 (input) / AN7 (input)
P16 (input) / AN6 (input)
P15 (input) / AN5 (input)
P14 (input) / AN4 (input)
P13 (input) / AN3 (input)
P12 (input) / AN2 (input)
P11 (input) / AN1 (input)
P10 (input) / AN0 (input)
Figure 18.14 Port I (PI7 to PI0)
18.10.1 Register Configuration
The port I register is shown in table 18.17.
Table 18.17 Port I Register
Name
Abbreviation R/W Initial Value^* Address
Port I data register
PIDR
R
Depends on H'FFFF 1290
external pins
Note: * Initial value depends on the pin state when a read is performed.
Access Size
8
Rev. 5.00 Sep 11, 2006 page 723 of 916
REJ09B0332-0500