M16C65 Datasheet, PDF (510/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60

Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
22. Remote Control Signal Receiver
22.3.3.5 Compare Function (PMC0)
Contents of registers PMC0CPD and PMCDAT0 are compared. Reception of the specific data which
is 1 to 8 bits can be detected.
When using compare function, follow the instructions below:
• The CPEN bit in the PMC0CPC register: 1 (compare enabled)
• Select bits to be compared by bits CPN2 to CPN0 in the PMC0CPC register (when setting value is
n, bits n to 0 are compared. n: 0 to 7)
• Set the compare data in the PMC0CPD register
The contents which have been compared are matched, the CPFLG bit in the PMC0STS register
becomes 1 (compare match).
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 475 of 791