M16C65 Datasheet, PDF (493/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60

Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
22. Remote Control Signal Receiver
22.2.9 PMCi Measurements Register (PMCiTIM) (i = 0, 1)
PMCi Measurements Register
(b15)
(b8)
b7
b0 b7
b0
Symbol
PMC0TIM
PMC1TIM
Address
D089h to D088h
D09Dh to D09Ch
Function
Measurements of pulse period and pulse width can be read.
After Reset
0000h
0000h
RW
RO
22.2.10 PMCi Counter Value Register (PMCiBC) (i = 0, 1)
PMCi Counter Value Register (i = 0, 1)
(b15)
(b8)
b7
b0 b7
b0
Symbol
PMC0BC
PMC1BC
Address
D08Bh to D08Ah
D09Fh to D09Eh
Function
The state of the counter can be read.
After Reset
0000h
0000h
RW
RO
22.2.11 PMC0 Receive Bit Count Register (PMC0RBIT)
PMC0 Receive Bit Count Register
b7 b6 b5 b4 b3 b2 b1 b0
Symbol
PMC0RBIT
Address
D092h
Function
Receive bit count can be read.
After Reset
XX00 0000b
RW
RO
No register bit. If necessary, set to 0. Read as undefined value.
—
Bit position of the storing buffer is specified by counting detected data 0/1.
When the receive bit count exceeds 48, it returns 1. Header and special data are not counted.
When the DRFLG bit in the PMC0STS register changes from 0 to 1, the PMC0RBIT register becomes
0.
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 458 of 791