M16C65 Datasheet, PDF (506/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60

Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
22. Remote Control Signal Receiver
22.3.3 Pattern Match Mode (Connected Operation of PMC0 and PMC1)
PMC0 and PMC1 is connected and one remote control signal can be received. In connected operation,
data 0 and data 1 are detected in PMC1. Whether to detect header and special data in PMC0 or PMC 1
can be selected. Select count source and remote control signal input pins in PMC1.
Table 22.11 lists Specifications in Pattern Match Mode (Connected Operation) and Figure 22.1 and
Figure 22.2 shows registers and setting values in pattern match mode (connected operation).
Table 22.11 Specifications in Pattern Match Mode (Connected Operation)
Count
sources
Item
Clock sources
Division
Count operation
Detect patterns
Receive buffer
Interrupt request generation
timing
Selectable functions
PMC0 Circuit
Count source of PMC1
No division
Increment
• Header
• Data 0
• Data 1
• Special data
6 bytes (48 bits)
• Receive error
• Completion of data reception
• Header match
• Data 0/1 match
• Special data match
• Receive buffer full
• Compare match
• Input signal inversion
• Digital filter
Content
PMC1 Circuit
One of the following:
• fC
• f1
• Timer B1 underflow
• Timer B2 underflow
No division, divided-by-8, divided-
by-32, or divided-by-64
• Header
• Special data
None
Not used
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 471 of 791