M16C65 Datasheet, PDF (482/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60

Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
22. Remote Control Signal Receiver
22.2.2 PMCi Function Select Register (PMCiCON1) (i = 0, 1)
PMC0 Function Select Register 1
b7 b6 b5 b4 b3 b2 b1 b0
0
Symbol
PMC0CON1
Address
01F1h
After Reset
00XX 0000b
Bit Symbol
Bit Name
Function
RW
TYP0
TYP1
Receive mode select bit
b1 b0
0 0 : Period measurement (between rising
edge and rising edge)
0 1 : In pattern match mode,
high level width measurement
(between rising edge and falling
edge)
In input capture mode,
RW
period measurement (between
falling edge and falling edge)
1 0 : Pulse width measurement (between
rising edge and falling edge, and
falling edge and rising edge)
1 1 : Do not set.
CSS
Counter start control bit
0: Counters operate individually
1: Counters operate simultaneously
RW
—
(b3)
Reserved bit
Set to 0.
RW
—
(b5-b4)
No register bits. If necessary, set to 0. Read as undefined value.
—
EXSDEN
Special pattern detect block 0: PMC0
select bit
1: PMC1
RW
EXHDEN
Header pattern detect block 0: PMC0
select bit
1: PMC1
RW
PMC1 Function Select Register 1
b7 b6 b5 b4 b3 b2 b1 b0
0
Symbol
PMC1CON1
Address
01F9h
After Reset
XXXX 0X00b
Bit Symbol
Bit Name
Function
RW
TYP0
TYP1
—
(b2)
—
(b3)
—
(b7-b4)
Receive mode select bit
b1 b0
0 0 : Period measurement (between rising
edge and rising edge)
0 1 : In pattern match mode,
high level width measurement
(between rising edge and falling
edge)
RW
In input capture mode,
period measurement (between
falling edge and falling edge)
1 0 : Pulse width measurement (between
rising edge and falling edge, and
falling edge and rising edge)
1 1 : Do not set.
No register bit. If necessary, set to 0. Read as undefined value.
—
Reserved bit
Set to 0.
RW
No register bits. If necessary, set to 0. Read as undefined value.
—
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 447 of 791