English
Language : 

M16C65 Datasheet, PDF (100/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60
Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
6. Resets
6.4 Operations
6.4.1 Status After Reset
The status of SFRs after reset depends on the reset type. Refer to values after reset in 4. “Special
Function Registers (SFRs)”. Table 6.6 lists Pin Status When RESET Pin Level is Low, Figure 6.2 shows
CPU Register Status after Reset, and Figure 6.3 shows Reset Sequence.
Table 6.6 Pin Status When RESET Pin Level is Low
Pin
Name
Single-Chip
Mode
(CNVSS = VSS)
Status (1)
Microprocessor Mode (CNVSS = VCC1, P5_5 = high)
BYTE = VSS
BYTE = VCC1
Boot Mode
(CNVSS = VCC1,
P5_5 = low)
P0
Input port
Data input
Data input
Input port
P1
Input port
Data input
Input port
Input port
P2, P3, Input port
P4_0 to
P4_3
Address output (undefined) Address output (undefined) Input port
P4_4 Input port
CS0 output
(High level is output)
CS0 output
(High level is output)
Input port
P4_5 to Input port
P4_7
Input port (pulled high)
Input port (pulled high)
Input port
P5_0 Input port
WR output
(High level is output)
WR output
(High level is output)
CE input (2)
P5_1 Input port
BHE output (undefined)
BHE output (undefined)
Input port
P5_2 Input port
RD output
(High level is output)
RD output
(High level is output)
Input port
P5_3 Input port
BCLK output
BCLK output
Input port
P5_4 Input port
HLDA output
HLDA output
(The output value depends (The output value depends
on the input to the HOLD pin) on the input to the HOLD
pin)
Input port
P5_5 Input port
HOLD input (2)
HOLD input (2)
EPM input (3)
P5_6 Input port
ALE output
(Low level is output)
ALE output
(Low level is output)
Input port
P5_7 Input port
RDY input
RDY input
Input port
P6, P7, Input port
P8, P9,
P10
Input port
Input port
Input port
Notes:
1. These two columns show the valid pin state when the internal power supply voltage has stabilized
after power on. The pin state is undefined until the internal power supply voltage stabilizes.
2. Input a high-level signal.
3. Input a low-level signal.
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 65 of 791