M16C65 Datasheet, PDF (501/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60

Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
22. Remote Control Signal Receiver
Table 22.10 Registers and Setting Values in Pattern Match Mode (Individual Operation) (2/2)
Register
PMCiINT
PMCiCPC
PMCiCPD
PMCiHDPMIN
PMCiHDPMAX
PMCiD0PMIN
Bit
CPINT
REINT
DRINT
BFULINT
PTHDINT
PTDINT
TIMINT
SDINT
CPN0
CPN1
CPN2
CPEN
0 to 7
0 to 10
0 to 10
0 to 7
Function
PMC0
PMC1
Set to 1 when using compare -
match flag interrupt
Set to 1 when using receive
error flag interrupt
Set to 1 when using receive
error flag interrupt
Set to 1 when using data
Set to 1 when using data
reception complete interrupt reception complete interrupt
Set to 1 when using receive -
buffer full flag interrupt
Set to 1 when using header
match flag interrupt
Set to 1 when using header
match flag interrupt
Set to 1 when using data 0/1 Set to 1 when using data 0/1
match flag interrupt
match flag interrupt
Set to 1 when using timer
measure interrupt
Set to 1 when using timer
measure interrupt
Set to 1 when using special -
data match flag interrupt
Select bits to be compared -
when using compare function
Set to 1 when using compare -
function
Set compare value when using -
compare function
Set minimum value of header Set minimum value of header
pattern
pattern
Set maximum value of header Set maximum value of header
pattern
pattern
Set minimum value of data 0 Set minimum value of data 0
pattern
pattern
PMCiD0PMAX
0 to 7
PMCiD1PMIN
0 to 7
PMCiD1PMAX
0 to 7
PMCiTIM
0 to 15
PMCiBC
0 to 15
PMCiDAT0 to
0 to 7
PMCiDAT5
PMC0RBIT
0 to 5
i = 0, 1
-: No register bit in PMC1
Set maximum value of data 0
pattern
Set minimum value of data 1
pattern
Set maximum value of data 1
pattern
Measured value of pulse
period or width can be read
Counter value can be read
Received data can be read
Set maximum value of data 0
pattern
Set minimum value of data 1
pattern
Set maximum value of data 1
pattern
Measured value of pulse
period or width can be read
Counter value can be read
-
Received bit count can be read -
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 466 of 791