English
Language : 

M16C65 Datasheet, PDF (41/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60
Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
1. Overview
Table 1.5 Specifications (80-Pin Package) (1/2)
Item
Function
Specification
CPU
Central processing unit
M16C/60 core
(multiplier: 16-bit × 16-bit  32-bit,
multiply and accumulate instruction: 16-bit × 16-bit + 32-bit 32-bit)
• Number of basic instructions: 91
• Minimum instruction execution time:
31.25 ns (f(BCLK) = 32 MHz, VCC1 = 3.0 to 5.5 V)
• Operating modes: Single-chip
Memory
ROM, RAM, data flash
See Table 1.7 “Product List”.
Voltage
Detection
Voltage detector
• Power-on reset
• 3 voltage detection points (detection level of voltage detection 0 and 1
selectable)
Clock
Clock generator
• 5 circuits: Main clock, sub clock, low-speed on-chip oscillator (125 kHz),
high-speed on-chip oscillator (40 MHz ± 10%), PLL frequency synthesizer
• Oscillation stop detection: Main clock oscillation stop detection and re-
oscillation detection function
• Frequency divider circuit: Divide ratio selectable from 1, 2, 4, 8, and 16
• Power save: Wait mode, stop mode
• Real time clock
I/O Ports
Programmable I/O ports
• CMOS I/O ports: 68, selectable pull-up resistor
• N-channel open drain ports: 3
Interrupts
• Interrupt vectors: 70
• External interrupt input: 10 (NMI, INT × 5, key input × 4)
• Interrupt priority levels: 7
Watchdog Timer
15 bits × 1 (with prescaler)
Automatic reset start function selectable
DMA
DMAC
• 4 channels, cycle steal mode
• Trigger sources: 43
• Transfer modes: 2 (single transfer, repeat transfer)
Timer
Timer A
16-bit timer × 5
Timer mode × 5
Event counter mode, one shot timer mode, pulse width modulation (PWM)
mode × 3
Event counter two-phase pulse signal processing (two-phase encoder
input) × 2
Programmable output mode × 1
Timer B
16-bit timer × 6
Timer mode × 6
Event counter mode, pulse period measurement mode, pulse width
measurement mode × 5
Real-time clock
Count: second, minute, hour, day of week
PWM function
8 bits × 2
Remote control signal
receiver
• 2 circuits
• 4 wave pattern matchings (differentiate wave pattern for headers, data 0,
data 1, and special data)
• 6-byte receive buffer (1 circuit)
• Operating frequency of 32 kHz
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 6 of 791