M16C65 Datasheet, PDF (491/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60

Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
22. Remote Control Signal Receiver
22.2.7 PMCi Header Pattern Set Register (MIN) (PMCiHDPMIN) (i = 0, 1)
PMCi Header Pattern Set Register (MAX) (PMCiHDPMAX) (i = 0, 1)
PMCi Header Pattern Set Register (MIN) (i = 0, 1)
(b15)
b7
(b8)
b0 b7
b0
Symbol
PMC0HDPMIN
PMC1HDPMIN
Address
D081h to D080h
D095h to D094h
After Reset
XXXX X000 0000 0000b
XXXX X000 0000 0000b
Function
Set the minimum width of header pattern or special data pattern.
Setting Range RW
0000h to 07FFh RW
No register bits. If necessary, set to 0. Read as undefined value.
—
PMCi Header Pattern Set Register (MAX) (i = 0, 1)
(b15)
b7
(b8)
b0 b7
b0
Symbol
PMC0HDPMAX
PMC1HDPMAX
Address
D083h to D082h
D097h to D096h
After Reset
XXXX X000 0000 0000b
XXXX X000 0000 0000b
Function
Set the maximum width of header pattern or special data pattern.
Setting Range RW
0000h to 07FFh RW
No register bits. If necessary, set to 0. Read as undefined value.
—
Set the minimum width of header or special data pattern to the PMCiHDPMIN register and the
maximum width to the PMCiHDPMAX.
Minimum width (maximum width) of header or special data pattern
Setting value n =
Count source
Set the different value from data 0 or data 1 to these register.
Set the following: PMCiHDPMIN register value < PMCiHDPMAX register value.
When not using header or special data detection, set registers PMCiHDPMIN and PMCiHDPMAX to
0000h.
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 456 of 791