M16C65 Datasheet, PDF (492/829 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/60

Under development
M16C/65 Group
Preliminary Specification
This is a preliminary specification and is subject to change.
22. Remote Control Signal Receiver
22.2.8
PMCi Data 0 Pattern Set Register (MIN) (PMCiD0PMIN) (i = 0, 1)
PMCi Data 0 Pattern Set Register (MAX) (PMCiD0PMAX) (i = 0, 1)
PMCi Data 1 Pattern Set Register (MIN) (PMCiD1PMIN) (i = 0, 1)
PMCi Data 1 Pattern Set Register (MAX) (PMCiD1PMAX) (i = 0, 1)
PMCi Data 0 Pattern Set Register (MIN) (i = 0, 1)
b7
b0
Symbol
Address
PMC0D0PMIN
D084h
PMC1D0PMIN
D098h
Function
Set the minimum width of data 0 pattern.
PMCi Data 0 Pattern Set Register (MAX) (i = 0, 1)
b7
b0
Symbol
Address
PMC0D0PMAX
D085h
PMC1D0PMAX
D099h
Function
Set the maximum width of data 0 pattern.
PMCi Data 1 Pattern Set Register (MIN) (i = 0, 1)
b7
b0
Symbol
Address
PMC0D1PMIN
D086h
PMC1D1PMIN
D09Ah
Function
Set the minimum width of data 1 pattern.
After Reset
00h
00h
Setting Range RW
00h to FFh
RW
After Reset
00h
00h
Setting Range RW
00h to FFh
RW
After Reset
00h
00h
Setting Range RW
00h to FFh
RW
PMCi Data 1 Pattern Set Register (MAX) (i = 0, 1)
b7
b0
Symbol
Address
PMC0D1PMAX
D087h
PMC1D1PMAX
D09Bh
Function
Set the maximum width of data 1 pattern.
After Reset
00h
00h
Setting Range RW
00h to FFh
RW
Set the minimum width of data 0 pattern to the PMCiD0PMIN register and the maximum width to the
PMCiD0PMAX register. Also set the minimum width of data 1 pattern to the PMCiD1PMIN register and
the maximum width to the PMCiD1PMAX register.
minimum width (maximum width) of data 0/1 pattern
Setting value n =
count source
Data 0, data 1, and header or special data pattern must be the different values. Set the following:
PMCiD0PMIN register value < PMCiD0PMAX register value, and PMCiD1PMIN < PMCiD1PMAX.
When not detecting data 0, registers PMCiD0PMIN and PMCiD0PMAX to 00h. When not detecting
data 1, registers PMCiD1PMIN and PMCiD1PMAX to 00h.
REJ09B0484-0030 Rev.0.30 Sep 09, 2008
Page 457 of 791