|
HC4GX15 Datasheet, PDF (75/668 Pages) Altera Corporation – HardCopy IV Device Handbook | |||
|
◁ |
Chapter 7: External Memory Interfaces in HardCopy IV Devices
7â9
Memory Interfaces Pin Support
You cannot use the RUP and RDN pins shared with DQS/DQ group pins when using Ã9
QDRII+/QDRII SRAM devices, as the RUP and RDN pins have a dual purpose with the
CQn pins. In this case, pick different pin locations for the RUP and RDN pins to avoid
conflict with memory interface pin placement. You have the choice of placing the RUP
and RDN pins in the data-write group or in the same bank as the address and
command pins. There is no restriction for using Ã16/Ã18 or Ã32/Ã36 DQS/DQ groups
that include the Ã4 groups in which the pin members are used as RUP and RDN pins.
These groups contain enough extra pins that they can be used as DQS pins.
You must pick your DQS and DQ pins manually for the Ã8/Ã9, Ã16/Ã18, or Ã32/Ã36
DQS/DQ group in which the members are used for RUP and RDN. Otherwise, the
Quartus II software might not be able to place these pins correctly if there are no
specific pin assignments and might give you a âno-fitâ instead.
Table 7â5 lists the maximum number of DQS/DQ groups per side of the
HardCopy IV E device.
Table 7â5. Number of DQS/DQ Groups in HardCopy IV E Devices per Side (Note 1)
Device
Package
Side
Ã4
Ã8/Ã9
Ã16/Ã18 Ã32/Ã36
Left
12
4
0
0
Bottom
5
2
0
0
484-pin FineLIne BGA
Right
12
4
0
0
HC4E25W
Top
5
2
0
0
Left
12
4
0
0
Bottom
13
6
0
0
780-pin FineLine BGA
Right
12
4
0
0
Top
13
6
0
0
Left
12
4
0
0
Bottom
5
2
0
0
484-pin FineLIne BGA
Right
12
4
0
0
HC4E25F
Top
5
2
0
0
Left
14
6
2
0
Bottom
17
8
2
0
780-pin FineLine BGA
Right
14
6
2
0
Top
17
8
2
0
Left
26
12
4
0
Bottom
26
12
4
0
1152-pin FineLine BGA
Right
26
12
4
0
HC4E35L
HC4E35F
Top
26
12
4
0
Left
26
12
4
0
Bottom
38
18
8
4
1517-pin FineLine BGA
Right
26
12
4
0
Top
38
18
8
4
Note to Table 7â5:
(1) In some Ã4 groups, you can use the DQS/DQ pins as RUP/RDN pins. You cannot use these Ã4 groups if the pins are used as RUP and RDN pins
for OCT calibration. Ensure that the DQS/DQ groups you chose are not also used for OCT calibration.
© January 2010 Altera Corporation
HardCopy IV Device Handbook, Volume 1
|
▷ |