English
Language : 

HC4GX15 Datasheet, PDF (656/668 Pages) Altera Corporation – HardCopy IV Device Handbook
1–26
Chapter 1: DC and Switching Characteristics of HardCopy IV Devices
Switching Characteristics
Table 1–28. HardCopy IV TriMatrix Memory Block Performance Specifications—Preliminary (Part 2
of 2) (Note 1)
Memory
Mode
TriMatrix
Memory
Max
Unit
Single-port 256×36
1
575
MHz
M9K Block Simple dual-port 256×36 single CLK
1
575
MHz
True dual port 512×18 single CLK
1
575
MHz
Single-port 2K×72
1
460
MHz
M144K
Simple dual-port 2K×72 dual CLK
Simple dual-port 2K×64 dual CLK (with ECC)
1
460
MHz
1
250
MHz
True dual-port 4K×36 dual CLK
1
460
MHz
Note to Table 1–28:
(1) Pending silicon characterization.
JTAG Specification
Table 1–29 shows the JTAG timing parameters and values for HardCopy IV devices.
Refer to the “HIGH-SPEED I/O Block” row in Table 1–39 on page 1–32 for JTAG
timing requirements.
Table 1–29. HardCopy IV JTAG Timing Parameters and Values—Preliminary
Symbol
Description
Min
Max
Unit
tJC P
TCK clock period
30
—
ns
tJC H
TCK clock high time
14
—
ns
tJC L
TCK clock low time
14
—
ns
tJPSU (TDI) TDI JTAG port setup time
1
—
ns
tJPSU (TMS) TMS JTAG port setup time
3
—
ns
tJP H
JTAG port hold time
5
—
ns
tJP CO
JTAG port clock to output
—
11 (1)
ns
tJP Z X
JTAG port high impedance to valid output
—
14 (1)
ns
tJP XZ
JTAG port valid output to high impedance
—
14 (1)
ns
Note to Table 1–29:
(1) A 1 ns adder is required for each VCCIO voltage step down from 3.0 V. For example, tJPCO= 12 ns if VCCIO of the TDO
I/O bank = 2.5 V, or 13 ns if it equals 1.8 V.
Periphery Performance
This section describes periphery performance, including high-speed I/O and external
memory interface, and OCT calibration block specifications.
High-Speed I/O Specification
Table 1–30 shows the high-speed I/O timing for HardCopy IV devices.
Table 1–30. High-Speed I/O Specifications—Preliminary (Part 1 of 2) (Note 1), (2), (3)
Symbol
Conditions
Min Typ Max Unit
fHSCLK(input clock frequency)
fHSCLK_OUT (output clock frequency)
Clock boost factor W = 1 to 40 (4)
5
—
717
MHz
5
—
717
MHz
HardCopy IV Device Handbook Volume 4
© June 2009 Altera Corporation