HC4GX15 Datasheet, PDF (206/668 Pages) Altera Corporation – HardCopy IV Device Handbook

3–4
Chapter 3: Mapping Stratix IV Device Resources to HardCopy IV Devices
HardCopy IV and Stratix IV Mapping Options
Table 3–2. HardCopy IV E and Stratix IV E Companion Devices
Companion Pair
HardCopy IV E ASIC
Stratix IV E FPGA Prototype
HardCopy IV Package
HC4E25WF484N (1)
EP4SE230F29 (F780)
484-pin FineLine BGA Wire Bond
HC4E25FF484N (1)
EP4SE230F29 (F780)
484-pin FineLine BGA
HC4E25WF780N
EP4SE230F29 (F780)
EP4SE360H29 (H780)
780-pin FineLine BGA Wire Bond
HC4E25FF780N
EP4SE230F29 (F780)
EP4SE360H29 (H780)
780-pin FineLine BGA
EP4SE360F35 (F1152)
HC4E35LF1152N
EP4SE530H35 (H1152)
EP4SE820H35 (H1152)
1152-pin FineLine BGA
EP4SE360F35 (F1152)
HC4E35FF1152N
EP4SE530H35 (H1152)
1152-pin FineLine BGA
EP4SE820H35 (H1152)
HC4E35LF1517N
EP4SE530H40 (H1517)
EP4SE820H40 (H1517)
1517-pin FineLine BGA
HC4E35FF1517N
EP4SE530H40 (H1517)
EP4SE820H40 (H1517)
1517-pin FineLine BGA
Note to Table 3–2:
(1) This mapping is a non-socket replacement path that requires a different board design for the Stratix IV E device
and the HardCopy IV E device. The Stratix IV E device is in a 780-pin FBGA package while the HardCopy IV E device
is in a 484-pin FBGA package.
When the Quartus II software successfully compiles a design, the HardCopy Device
Resource Guide in the Fitter Compilation Report contains information about mapping
compatibility to a HardCopy IV device. Use this information to select the optimal
HardCopy IV device for the prototype Stratix IV device based on resource and
package requirements.
Table 3–3 and Table 3–4 show the available resources for prototyping on a Stratix IV
device when choosing a HardCopy IV device.
HardCopy IV Device Handbook, Volume 2
© January 2010 Altera Corporation