HC4GX15 Datasheet, PDF (607/668 Pages) Altera Corporation – HardCopy IV Device Handbook

3. HardCopy IV GX ALTGX_RECONFIG
Megafunction User Guide
HIV530 03-1.0
Introduction
The MegaWizard^TM Plug-In Manager in the Quartus^® II software creates or modifies
design files that contain custom megafunction variations. These auto-generated
MegaWizard Plug-In Manager files can then be instantiated in a design file. The
MegaWizard Plug-In Manager allows you to specify options for the
ALTGX_RECONFIG megafunction.
Start the MegaWizard Plug-In Manager using one of the following methods:
■ On the Tools menu, choose the MegaWizard Plug-In Manager command.
■ When working in the Block Editor (schematic symbol), open the Edit menu and
choose Insert Symbol. The Symbol dialog box appears. In the Symbol dialog box,
click MegaWizard Plug-In Manager.
■ Start the stand-alone version of the MegaWizard Plug-In Manager by typing the
following command at the command prompt: qmegawiz.
Dynamic Reconfiguration
This section describes the options available on the individual pages of the
ALTGX_RECONFIG MegaWizard Plug-In Manager.
1 The MegaWizard Plug-In Manager provides a warning if any of the settings you
choose are illegal.
Figure 3–1 shows the first page of the MegaWizard Plug-In Manager. To generate an
ALTGX_RECONFIG custom megafunction variation, select Create a new custom
megafunction variation. Click Next.
Figure 3–1. MegaWizard Plug-In Manager (Page 1)
© June 2009 Altera Corporation
HardCopy IV Device Handbook Volume 3