HC4GX15 Datasheet, PDF (650/668 Pages) Altera Corporation – HardCopy IV Device Handbook

Chapter 1: DC and Switching Characteristics of HardCopy IV Devices
1–20
Switching Characteristics
Table 1–24. HardCopy IV GX Transceiver Block Jitter Specification (Note 1) and (2) (Part 3 of 6)
Symbol/Description
Conditions
Min Typ
Max Unit
Peak-to-peak jitter
Peak-to-peak jitter
Jitter frequency = 1.875MHz
> 0.1
UI
Jitter frequency = 20MHz
> 0.1
UI
PCI Express Transmit Jitter Generation (6)
Total jitter at 2.5Gbps (Gen1)
Total jitter at 5Gbps (Gen2)
Compliance pattern
Compliance pattern
PCI Express Receiver Jitter Tolerance (6)
Total jitter at 2.5Gbps (Gen1)
Total jitter at 2.5Gbps (Gen2)
Compliance pattern
Compliance pattern
Serial RapidIO Transmit Jitter Generation (7)
Deterministic jitter (peak-to-peak)
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
Total jitter (peak-to-peak)
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
Serial RapidIO Receiver Jitter Tolerance (7)
Deterministic jitter (peak-to-peak)
Data Rate = 1.25, 2.5, 3.125 Gbps
Pattern = CJPAT
— — 0.25
UI
—
—
— UI
> 0.6
—
—
UI
— UI
— — 0.17
UI
— — 0.35
UI
> 0.37
UI
Combined deterministic and random jitter Data Rate = 1.25, 2.5, 3.125 Gbps
tolerance (peak-to-peak)
Pattern = CJPAT
> 0.55
UI
Jitter Frequency = 22.1KHz
Data Rate = 1.25, 2.5, 3.125 Gbps
> 8.5
UI
Pattern = CJPAT
Jitter Frequency = 1.875MHz
Sinusoidal jitter tolerance (peak-to-peak) Data Rate = 1.25, 2.5, 3.125 Gbps
> 0.1
UI
Pattern = CJPAT
Jitter Frequency = 20MHz
Data Rate = 1.25, 2.5, 3.125 Gbps
> 0.1
UI
Pattern = CJPAT
GIGE Transmit Jitter Generation (8)
Deterministic jitter (peak-to-peak)
Total jitter (peak-to-peak)
Pattern = CRPAT
Pattern = CRPAT
GIGE Receiver Jitter Tolerance (8)
Deterministic jitter (peak-to-peak)
Combined deterministic and random jitter
tolerance (peak-to-peak)
Pattern = CJPAT
Pattern = CJPAT
— — 0.14
UI
— — 0.279 UI
> 0.4
UI
> 0.66
UI
© June 2009 Altera Corporation
HardCopy IV Device Handbook Volume 4