HC4GX15 Datasheet, PDF (521/668 Pages) Altera Corporation – HardCopy IV Device Handbook

Chapter 2: HardCopy IV GX Dynamic Reconfiguration
2–63
Description of Transceiver Channel Reconfiguration Modes
1 You can enable all the above dynamic reconfiguration modes together by selecting the
Enable Channel and Transmitter PLL Reconfiguration option in the Reconfig screen
of the ALTGX MegaWizard Plug-In Manager (shown in Figure 2–27). (You do not
have the option to individually enable any of the above dynamic reconfiguration
modes in the ALTGX MegaWizard Plug-In Manager.)
Figure 2–27. The Enable Channel and Transmitter PLL Reconfiguration Option in the ALTGX MegaWizard Plug-In Manager
Data Rate Division in TX Mode
You can use the Date Rate Division in TX mode to modify the data rate of the
transmitter channel in multiples of 1, 2, and 4. This dynamic reconfiguration mode is
available only for the transmit side and not for the receive side.
© June 2009 Altera Corporation
HardCopy IV Device Handbook, Volume 3