HC4GX15 Datasheet, PDF (632/668 Pages) Altera Corporation – HardCopy IV Device Handbook

1–2
Chapter 1: DC and Switching Characteristics of HardCopy IV Devices
Electrical Characteristics
Table 1–1. HardCopy IV Device Absolute Maximum Ratings—Preliminary (Part 2 of 2) (Note 1)
Symbol
Description
Minimum Maximum Unit
TS T G
Storage temperature (No bias)
-65
150
C
Notes for Table 1–1:
(1) Supply voltage specifications apply to voltage readings taken at the device pins and not the power supply.
(2) HardCopy IV devices do not require Programmable Power Technology.
(3) This power supply is not used in HardCopy IV devices.
Table 1–2 HardCopy IV GX Transceiver Power Supply Absolute Maximum Ratings.
Table 1–2. HardCopy IV GX Transceiver Power Supply Absolute Maximum Ratings
Symbol
Description
Minimum
Maximum
Unit
V_{CCA_L}
Transceiver high voltage power
(left side)
-0.5
3.75
V
V_{CCA_R}
Transceiver high voltage power
(right side)
-0.5
3.75
V
V_{CCHIP_L}
Transceiver hard IP digital power
(right side)
-0.5
1.35
V
V_{CCHIP_R}
Transceiver hard IP digital power
(left side)
-0.5
1.35
V
V_{CCR_L}
Receiver power (left side)
-0.5
V_{CCR_R}
Receiver power (right side)
-0.5
V_{CCT_L}
Transmitter power (left side)
-0.5
V_{CCT_R}
Transmitter power (right side)
-0.5
V_{CCL_GXBLn} (1) Transceiver clock power (left side)
-0.5
V_{CCL_GXBRn} (1) Transceiver clock power (right side)
-0.5
V_{CCH_GXBLn} (1)
Transmitter output buffer power
(left side)
-0.5
1.35
V
1.35
V
1.35
V
1.35
V
1.35
V
1.35
V
1.65
V
V_{CCH_GXBRn} (1)
Transmitter output buffer power
(right side)
-0.5
1.65
V
Notes to Table 1–2:
(1) The V_CCH and V_CCL powers are per transceiver block.
Maximum Allowed Overshoot/Undershoot Voltage
During transitions, input signals may overshoot to the voltage shown in Table 1–3 and
undershoot to -2.0 V for input currents less than 100 mA and periods shorter than
20 ns.
Table 1–3 lists the maximum allowed input overshoot voltage and the duration of the
overshoot voltage as a percentage of device lifetime. The maximum allowed
overshoot duration is specified as a percentage of high-time over the lifetime of the
device. A DC signal is equivalent to 100% duty cycle.
HardCopy IV Device Handbook Volume 4
© June 2009 Altera Corporation